[1]石钏,李永亮,任祥忠,等.高性能锂电正极材料LiV3O8-MWCNTs的制备与性能[J].深圳大学学报理工版,2017,34(6):551-556.[doi:10.3724/SP.J.1249.2017.06551]
　Shi Chuan,Li Yongliang,Ren Xiangzhong,et al.Preparation and properties of LiV3O8-MWCNTs as high performance cathode materials for lithium-ion battery[J].Journal of Shenzhen University Science and Engineering,2017,34(6):551-556.[doi:10.3724/SP.J.1249.2017.06551]
点击复制

高性能锂电正极材料LiV3O8-MWCNTs的制备与性能()
分享到：

《深圳大学学报理工版》[ISSN:1000-2618/CN:44-1401/N]

卷:
第34卷
期数:
2017年第6期
页码:
551-556
栏目:
材料科学
出版日期:
2017-11-20

文章信息/Info

Title:
Preparation and properties of LiV3O8-MWCNTs as high performance cathode materials for lithium-ion battery
文章编号:
201706001
作者:
石钏; 李永亮; 任祥忠; 邓立波; 高原; 张培新
深圳大学化学与环境工程学院，广东深圳 518060
Author(s):
Shi Chuan;  Li Yongliang;  Ren Xiangzhong;  Deng Libo;  Gao Yuan;  and Zhang Peixin
College of Chemistry and Environmental Engineering, Shenzhen University, Shenzhen 518060, Guangdong Province, P.R.China
关键词:
复合材料; 锂离子电池; 低温液相法; 钒酸锂; 多壁碳纳米管; 正极材料; 电化学性能
Keywords:
composite material;  lithium-ion battery;  low temperature liquid reaction;  LiV3O8;  multiwalled carbon nanotube (MWCNT);  cathode materials;  electrochemical performance
分类号:
TM 912
DOI:
10.3724/SP.J.1249.2017.06551
文献标志码:
A
摘要:
利用低温液相法合成了钒酸锂-多壁碳纳米管（LiV3O8-(w)MWCNTs）（w分别为0、1%、2%、3%、4%和5%）复合正极材料．采用X-射线衍射（X-ray diffraction, XRD）和扫描电镜（scanning electron microscope, SEM）对复合材料的晶型和结构进行了表征. XRD分析结果表明，复合材料仍为单斜晶系；SEM图谱显示，LiV3O8材料附着在MWCNTs的网状结构上，且使颗粒细化；通过恒流充放电测试、循环伏安（cyclic voltammetry, CV）及交流阻抗谱（electrochemical impedance spectroscopy, EIS）技术对材料的电化学性能进行了研究，结果表明，按LiV3O8质量百分比复合3% MWCNTs的LiV3O8-(3%)MWCNTs复合材料具有最佳的电化学性能，在0.1 C充放电倍率条件下，其首次放电比容量为364.5 mAh/g，循环50次后放电比容量仍有292.2 mAh/g，容量保持率为80.2%，而纯LiV3O8材料的首次放电比容量为308.2 mAh/g，循环50次后容量保持率仅为55.4%；采用MWCNTs与LiV3O8复合可使锂离子在材料颗粒间的电荷转移阻抗变小，有利于Li+的嵌入和脱出．
Abstract:
Lithium trivanadate-multiwalled carbon nanotube (LiV3O8-(w) MWCNT)(w = 0, 1%, 2%, 3%, 4%, 5%) composite cathode materials are synthesized by low temperature liquid reaction. The crystal structures and microstructures are investigated by X-ray diffraction (XRD) and scanning electron microscope (SEM). XRD analyses show that the LiV3O8-(w) MWCNTs are still monoclinic. The SEM images show that the LiV3O8 is attached to the network structure of MWCNTs, and the LiV3O8 particles are refined. The electrochemical properties are also characterized with charge-discharge cycling performance, cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). The results show that LiV3O8-(3%)MWCNTs have the best electrochemical properties when the mass percentage of MWCNTs is 3 % in the composite, exhibiting a high discharge capacity of 364.5 mAh/g maintaining a stable capacity of 292.2 mAh/g within 50 cycles at the charge-discharge rate of 0.1 C, and having the capacity retention of 80.2%. However, in the pure LiV3O8, the discharge capacity is 308.2 mAh/g, and the capacity retention is only about 55.4% after 50 cycles. Finally, the EIS results show that the lithium-ion charge-transfer resistance decreases greatly when LiV3O8 is coated with NWCNTs, which is favorable for fast lithium-ion intercalations/deintercalations in the composite materials.

参考文献/References:

［1］ Wu Zhaojin, Zhou Yuan. Effect of Ce-doping on the structure and electrochemical performance of lithium trivanadate prepared by a citrate sol-gel method［J］. Journal of Power Sources, 2012, 199: 300-307.
［2］ Shui Miao, Zheng Weidong, Shu Jie, et al. Synthesis and electrochemical performance of Li1+xV3O8 as cathode material prepared by citric acid and tartaric acid assisted sol-gel processes［J］. Current Applied Physics, 2013, 13: 517-521.
［3］ Jin K, Takashi M, Tomiya K. Lithium insertion and extraction kinetics of Li1+xV3O8［J］. Journal of Power Sources, 1999, 83:79-83.
［4］ Zhong Changrong, Su Xunjia, Hou Genliang, et al. Effect of different treatment methods on the electrochemical properties of LiV3O8 at elevated temperatures［J］. Ceramics International, 2017, 43: 414-419.
［5］ Wang Panpan, Xu Chengyan, Wang Long, et al. Electrochemical behavior and structural stability of LiV3O8 microrods as cathode for lithium-ion batteries［J］. Ceramics International, 2016, 42: 18747-18755.
［6］ Zheng Jiqi, Zhang Yifu, Wang Nannan, et al. Facile synthesis and characterization of LiV3O8 with sheet-like morphology for high-performance supercapacitors［J］. Materials Letters, 2016, 171: 240-243.
［7］ Li Kaiqi, Cao Liufei, Huang Zheng, et al. Novel cathode materials LixNa2xV2O6(x=2, 1.4, 1, 0) for high performance lithium-ion batteries［J］. Journal of Power Sources, 2017, 344: 25-31.
［8］ Wang Zongkai, Shu Jie, Zhu Qiancheng, et al. Graphene-nanosheet-wrapped LiV3O8 nanocomposites as high performance cathode materials for rechargeable lithium-ion batteries［J］. Journal of Power Sources, 2016, 307: 426-434.
［9］ Cao Xiaoyu, Zhu Limin, Wu Hailian. Preparation and electrochemical performances of rod-like LiV3O8/carbon composites using polyaniline as carbon source［J］. Electronic Materials Letters, 2015, 11(4): 650-657.
［10］ Liang Shuquan, Qin Mulan, Liu Jun, et al. Facile synthesis of multiwalled carbon nanotube-LiV3O8 nanocomposites as cathode materials for Li-ion batteries［J］. Materials Letters, 2013, 93: 435-438.
［11］ Ren Xiangzhong, Shi Chuan, Zhang Peixin, et al. Synthesis and electrochemical performance of LiV3O8/MWCNTs cathode material for lithium-ion batteries［J］. Advanced Materials Research, 2012, 454: 105-109.
［12］ 李健, 官亦标, 傅凯, 等. 碳纳米管与石墨烯在储能电池中的应用［J］. 化学进展, 2014, 26(7): 1233-1243.
Li Jian, Guan Yibiao, Fu Kai, et al. Application of carbon nanotubes and graphene in the energy storage batteries［J］. Progress in Chemistry, 2014,26(7):1233-1243.（in Chinese）
［13］ 常笑从. 碳纳米管在锂离子电池中的应用［J］. 电池, 2016, 46(4): 227-230.
Chang Xiaocong. Application of carbon nanotube in Li-ion battery［J］.Battery,2016,46(4):227-230.（in Chinese）
［14］ ang Guiling, Ma Zhipeng, Shao Guangjie, et al. Synthesis of LiFePO4 carbon nanotube coreeshell nanowires with a high-energy efficient method for superior lithium ion battery cathodes［J］. Journal of Power Sources, 2015, 291: 209-214.
［15］ 曾志峰, 张海燕, 胡西多, 等. 磷酸铁锂掺碳纳米管的电化学性能研究［J］. 电源技术, 2012, 36(5): 626-628.
Zeng Zhifeng, Zhang Haiyan, Hu Xiduo, et al. Study on electrochemisty of LiFePO4 doping with MWCNTs［J］. Chinese Journal of Power Sources, 2012,36(5):626-628.（in Chinese）
［16］ Naoi Katsuhiko, Kisu Kazuaki, Okita Naohisa, et al. Cathode properties of nanocrystalline Li3V1.8Al0.2(PO4)3/multi-walled carbon nanotube composites for hybrid capacitor prepared via ultra-centrifugation treatment［J］. Electrochemistry, 2015, 83(4): 249-255.
［17］ Shi Fuzhi, Liu Jin, Cui Bo, et al. Fabrication of LiMnPO4-MWCNT cathode material via vapor phase hydrolysis and its electrochemical properties［J］. Ionics, 2015, 21(3): 651-656.
［18］ Li Jun, Li Shaofang, Li Xuefeng, et al. Synthesis and electrochemical characterization of MWCNTs-improved Li3V2(PO4)3/C as cathode material for lithium-ion batteries with extremely high capacity［J］. Electrochimica Acta, 2015, 180: 252-259.
［19］ Tang Mengxuan, Yuan Anbao, Xu Jiaqiang. Synthesis of highly crystalline LiMn2O4/multiwalled carbon nanotube composite material with high performance as lithium-ion battery cathode via an improved two-step approach［J］. Electrochimica Acta, 2015, 166: 244-252.
［20］ 董彬彬, 曹高萍, 陈晓红, 等. 锂离子电池用高倍率性能 Li4Ti5O12/MWNTs复合材料［J］. 电源技术, 2014, 138(7): 1211-1213.（in Chinese）
Dong Binbin, Cao Gaoping, Chen Xiaohong, et al. High rate performance of Li4Ti5O12/MWNTs composites for Li-ion batteries［J］. Chinese Journal of Power Sources, 2014,138(7):1211-1213.
［21］ 胡正西, 张海燕, 张国庆, 等. 新型(LiFeO4+LiMn2O4)/(Li4Ti5O12+CNTS)锂离子电池的制备［J］. 电源技术, 2013, 137(5): 729-731.
Hu Zhengxi, Zhang Haiyan, Zhang Guoqing, et al. Preparation of a new type of (LiFeO4+LiMn2O4)/(Li4Ti5O12+CNTS) lithium-ion battery［J］. Chinese Journal of Power Sources, 2013,137(5):729-731.（in Chinese）
［22］ Song Huanqiao, Luo Mingsheng, Wang Aimei. High rate and stable Li-ion insertion in oxygen-deficient LiV3O8 nanosheets as a cathode material for lithium-ion battery［J］. ACS Applied Materials & Interfaces, 2017, 9: 2875-2882.

相似文献/References:

[1]倪　卓,刘剑洪,魏波,等.PEEK/AS4复合材料微观结构表征[J].深圳大学学报理工版,2007,24(1):47.
　NI Zhuo,LIU Jian-hong,WEI Bo,et al.Microstructural charaterization of Polyetheretherketon/AS4 composites[J].Journal of Shenzhen University Science and Engineering,2007,24(6):47.
[2]曹慧群,周晓明,刘剑洪,等.氧化铕组装碳纳米管的制备和表征[J].深圳大学学报理工版,2007,24(1):54.
　CAO Hui-qun,ZHOU Xiao-ming,LIU Jian-hong,et al.The preparation and characteration of carbon nanotubes assembled with europium oxide[J].Journal of Shenzhen University Science and Engineering,2007,24(6):54.
[3]倪卓,张萍,林燕玲,等.不饱和聚酯/微胶囊复合材料自修复性能[J].深圳大学学报理工版,2010,27(3):260.
　NI Zhuo,ZHANG Ping,LIN Yan-ling,et al.Self-repairing behaviours of unsaturated polyester/microcapsule composites[J].Journal of Shenzhen University Science and Engineering,2010,27(6):260.
[4]贵大勇,郝景峰,赖玉丽,等.有机硅改性环氧树脂制备及热稳定性[J].深圳大学学报理工版,2011,28(No.6(471-564)):507.
　GUI Da-yong,HAO Jing-feng,LAI Yu-li,et al.Modification of epoxy resin with diphenyl silanediol and its thermal stability[J].Journal of Shenzhen University Science and Engineering,2011,28(6):507.
[5]许新统,翟剑庞,付玲,等.CHA晶体孔道内Se8合成及光学表征[J].深圳大学学报理工版,2011,28(No.6(471-564)):518.
　XU Xin-tong,ZHAI Jian-pang,FU Ling,et al.Synthesis and optical characterization of Se8ring incorporated inside the cages of CHA crystals[J].Journal of Shenzhen University Science and Engineering,2011,28(6):518.
[6]宋远佳,张炜,杨正伟,等.固体火箭发动机壳体脱黏缺陷的热波检测[J].深圳大学学报理工版,2012,29(No.3(189-282)):252.[doi:10.3724/SP.J.1249.2012.03252]
　SONG Yuan-jia,ZHANG Wei,YANG Zheng-wei,et al.Debond defect detection in shell of solid rocket motor by thermal wave nondestructive testing[J].Journal of Shenzhen University Science and Engineering,2012,29(6):252.[doi:10.3724/SP.J.1249.2012.03252]
[7]倪卓,王应,华文语,等.PEEK/HA生物复合材料的热稳定性[J].深圳大学学报理工版,2012,29(No.6(471-580)):521.[doi:10.3724/SP.J.1249.2012.06521]
　NI Zhuo,WANG Ying,HUA Wen-yu,et al.Thermal stability of ?PEEK/HA biological composite materials[J].Journal of Shenzhen University Science and Engineering,2012,29(6):521.[doi:10.3724/SP.J.1249.2012.06521]
[8]刘剑洪,吴双泉,何传新,等.碳纳米管和碳微米管的结构、性质及其应用[J].深圳大学学报理工版,2013,30(No.1(001-110)):1.[doi:10.3724/SP.J.1249.2013.01001]
　Liu Jianhong,Wu Shuangquan,He Chuanxin,et al.Structure, property and application of carbon nanotubes and carbon microtubes[J].Journal of Shenzhen University Science and Engineering,2013,30(6):1.[doi:10.3724/SP.J.1249.2013.01001]
[9]倪卓,刘士德,王应,等.PEEK-HA生物材料对成纤维细胞3T3的影响[J].深圳大学学报理工版,2013,30(No.4(331-440)):392.[doi:10.3724/SP.J.1249.2013.04392]
　Ni Zhuo,Liu Shide,Wang Ying,et al.Influence of 3T3 cells for PEEK-HA composite[J].Journal of Shenzhen University Science and Engineering,2013,30(6):392.[doi:10.3724/SP.J.1249.2013.04392]
[10]倪卓,王应,王双,等.PEEK-HA生物复合材料对MG-63细胞的作用[J].深圳大学学报理工版,2014,31(3):258.[doi:10.3724/SP.J.1249.2014.03258]
　Ni Zhuo,Wang Ying,Wang Shuang,et al.Influence of PEEK-HA composites on MG-63 cells[J].Journal of Shenzhen University Science and Engineering,2014,31(6):258.[doi:10.3724/SP.J.1249.2014.03258]
[11]龚露露,罗国旗,姚俊,等.高性能硅铜合金负极材料的制备及性能研究[J].深圳大学学报理工版,2021,38(3):272.[doi:10.3724/SP.J.1249.2021.03272]
　GONG Lulu,LUO Guoqi,YAO Jun,et al.Preparation and electrochemical properties of silicon copper alloy for high performance anode[J].Journal of Shenzhen University Science and Engineering,2021,38(6):272.[doi:10.3724/SP.J.1249.2021.03272]

备注/Memo

备注/Memo:
Received：2017-03-01；Accepted：2017-06-14
Foundation：National Natural Science Foundation of China (21671136); Natural Science Foundation of Guangdong Province (2016A030313057)
Corresponding author：Professor Ren Xiangzhong. E-mail：renxz@szu.edu.cn
Citation：Shi Chuan, Li Yongliang, Ren Xiangzhong, et al. Preparation and properties of LiV3O8-MWCNTs as high performance cathode materials for lithium-ion battery［J］. Journal of Shenzhen University Science and Engineering, 2017, 34(6): 551-556.（in Chinese）
基金项目：国家自然科学基金资助项目（21671136）；广东省自然科学基金资助项目（2016A030313057）
作者简介：石钏(1986—)，女，深圳大学实验技术员.研究方向：材料化学.E-mail：shichuan@szu.edu.cn
引文：石钏，李永亮，任祥忠，等. 高性能锂电正极材料LiV3O8-MWCNTs的制备与性能［J］. 深圳大学学报理工版，2017，34(6)：551-556.
更新日期/Last Update: 2017-10-10