[1]周英武,胡智恒,胡彪.受压区局部增强的钢筋混凝土梁抗剪性能[J].深圳大学学报理工版,2021,38(5):479-488.[doi:10.3724/SP.J.1249.2021.05479]
 ZHOU Yingwu,HU Zhiheng,and HU Biao.Shear behavior of reinforced concrete beam with local enhancement in compression zone[J].Journal of Shenzhen University Science and Engineering,2021,38(5):479-488.[doi:10.3724/SP.J.1249.2021.05479]
点击复制

受压区局部增强的钢筋混凝土梁抗剪性能()
分享到:

《深圳大学学报理工版》[ISSN:1000-2618/CN:44-1401/N]

卷:
第38卷
期数:
2021年第5期
页码:
479-488
栏目:
土木建筑工程
出版日期:
2021-09-15

文章信息/Info

Title:
Shear behavior of reinforced concrete beam with local enhancement in compression zone
文章编号:
202105006
作者:
周英武胡智恒胡彪
深圳大学土木与交通工程学院,广东省滨海土木工程耐久性重点实验室,广东深圳 518060
Author(s):
ZHOU Yingwu HU Zhiheng and HU Biao
College of Civil and Transportation Engineering, Guangdong Provincial Key Laboratory of Durability for Marine Civil Engineering, Shenzhen University, Shenzhen, 518060, Guangdong Province, P.R.China
关键词:
结构工程钢筋混凝土梁抗剪强度受压区纤维增强水泥基复合材料剪切挠度
Keywords:
structural engineering reinforced concrete beam shear strength compression zone engineered cementitious composite shear deflection
分类号:
TU375.1
DOI:
10.3724/SP.J.1249.2021.05479
文献标志码:
A
摘要:
钢筋混凝土梁受压区的应力状态和材料性能对抗剪承载力和变形能力的影响显著.用性能更好的纤维增强水泥基复合材料(engineered cementitious composite, ECC)替换受压区混凝土,以增强钢筋混凝土梁的抗剪性能,是一个崭新的尝试. 设计了4条全尺寸的钢筋混凝土梁,研究受压区ECC对有/无箍筋梁抗剪性能的影响;为得到准确的箍筋和混凝土的抗剪贡献,在箍筋内部安装应变片还原真实的箍筋抗剪贡献;为了解耦弯曲挠度和剪切挠度,采用非接触式数字图像系统测量混凝土表面的应变场. 结果表明:受压区ECC改变了梁的破坏过程;对于无箍筋梁,受压区ECC的存在使得构件抗剪承载力和挠度分别提高了92.0%和97.3%,对于有箍筋梁,抗剪承载力和挠度提高幅度分别为5.2%和26.8%;在主斜裂缝发展过程中,普通混凝土梁的混凝土抗剪贡献缓慢下降,而受压区用ECC替换的梁则是先缓慢减小然后逐渐增大直至剪切破坏;用两种方法解耦了梁的弯曲挠度和剪切挠度,二者结果吻合较好;现有典型规范不能准确的预测混凝土与箍筋的抗剪贡献.
Abstract:
The stress conditions and material properties of the compression zone of reinforced concrete (RC) beam significantly influence the shear behavior. Using the highperformance engineered cementitious composite (ECC) to locally replace the compression zone concrete is a new pilot standpoint to enhance the shear performance of RC beams. Four full-scale RC beams are designed to investigate the effects of compression zone ECC on the shear behaviors of RC beams without and with stirrups. To accurately and directly obtain the shear contributions of stirrups and concrete, large numbers of strain gauges are installed inside each stirrup, rather than on the surface, aiming to eliminate the strain measurement error caused by the bond-slip effect. Digital image correlation (DIC) is adopted to monitor the strain fields of a concrete beam, based on which the flexural and shear deflections can be decoupled. The results indicate that the ECC changes the failure process of EC beams. For RC beams without stirrups, the inclusion of ECC increases the shear strength and deflection by 92.0% and 97.3%, respectively, and these two values are 5.2% and 26.8% for beams with stirrups. For beams with stirrups, from the occurrence of the critical diagonal crack to shear failure, the contribution of concrete of conventional RC beam decreases monotonically. However, for the beam with ECC, this component decreases first and increases again. Two methods are utilized to decouple the flexural and shear deflections, and the results matches well with each other. Some existing typical design codes cannot accurately predict the contribution of concrete and stirrups.

参考文献/References:

[1] TAHENNI T, BOUZIADI F, BOULEKBACHE B, et al. Experimental and nonlinear finite element analysis of shear behaviour of reinforced concrete beams[J]. Structures, 2021, 29:1582-1596.
[2] REINECT K H, BENTZ E C, FITIK B, et al. ACI-DAfStb databases forshear tests on slender reinforced concrete beams with stirrups[J]. ACI Structural Journal, 2014, 111(5):1147-1156.
[3] CAVAGNIS F, FERNANDEZR M, MUTTONI A. A mechanical model for failures in shear of members without transverse reinforcement based on development of a critical shear crack[J]. Engineering Structures, 2018, 157:300-315.
[4] CLASEN M. Shear crack propagation theory (SCPT): The mechanical solution to the riddle of shear in RC members without shear reinforcement[J]. Engineering Structures, 2020, 210(1):110207.
[5] PARK H G, CHOI K K. Unified shear design method of concrete beams based on compression zone failure mechanism[J]. Concrete International, 2017, 39(9): 59-63.
[6] WU Yufei. New avenue of achieving ductility for reinforced concrete members[J]. Journal of Structural Engineering, 2006, 132(9):1502-1506.
[7] YU Kequan, WANG Yichao, YU Jiangtao, et al. A strain-hardening cementitious composites with the tensile capacity up to 8%[J]. Construction and Building Materials, 2017, 137:410-419.
[8] HU Biao, ZHOU Yingwu, XING Feng, et al. Experimental and theoretical investigation onthe hybrid CFRP-ECC flexural strengthening of RC beams with corroded longitudinalreinforcement[J]. Engineering Structures, 2019, 200: 109717.
[9] WU Yufei, HU Biao. Shear strength components in reinforced concrete members[J]. Journal of Strutural Engineering, 2017, 143(9):04017092.
[10] HU Biao, WU Yufei. Quantification of shear cracking in reinforced concrete beams[J]. Engineering Structures, 2017, 147:666-678.
[11] HU Biao, WU Yufei. Effect of shear span-to-depth ratio on shear strength components of RC beams[J]. Engineering Structures, 2018, 168:770-783.
[12] JSCE—2008 Recommendations for design and construction of high performance fiber reinforced cement composites with multiple fine cracks[S].
[13] GB 50010—2010 混凝土结构设计规范[S].
GB 50010—2010 Code for design of concrete structures[S].(in Chinese)
[14] ACI 318—2014 Building code requirements for structural concreteand commentary[S].
[15] JSCE 15-2015 Standard specification for concrete structure[S].
[16] CSA A23.3—2014 Design of concrete structures[S].
[17] FIB—2010 Fibmodel code for concrete structures[S].
[18] 吕志涛,潘钻峰. 大跨径预应力混凝土箱梁桥设计中的几个问题[J]. 土木工程学报,2010,43(1):70-76.
LU Zhitao,PAN Zuanfeng. Issues in design of long-span prestressed concrete box girder bridges[J]. China Civil Engineering Journal,2010,43(1):70-76.(in Chinese)
[19] 黄正,吕志涛,涂永明. 基于扰动应力场模型的ABAQUS二次开发与其与塑性损伤模型的比较[J]. 土木工程学报,2016,49(5):40-49.
HUANG Zheng,L Zhitao,TU Yongming. Secondary development of ABAQUS based on disturbed stress field model (DSFM) and its comparison with damage plasticity model[J]. China Civil Engineering Journal,2016,49(5):40-49.(in Chinese)
[20] 周世军,江瑶,吴云丹,等. 考虑滑移和剪切变形的单箱双室组合箱梁剪力滞效应[J]. 土木建筑与环境工程,2017,39(3):20-27.
ZHOU Shijun,JIANG Yao,WU Yundan,et al. Shear lag effect of twin-cell composite beams considering slip and shear deformation[J]. Journal of Civil, Architectural & Environmental Engineering,2017,39(3):20-27.(in Chinese)
[21] 李丽园,刘世忠,周茂定,等. 薄壁箱梁的剪切附加挠度分析[J]. 兰州交通大学学报自然科学版,2019,38(1):26-31.
LI Liyuan,LIU Shizhong,ZHOU Maoding,et al. Analysis of shear additional deflection of thin-walled box girders[J]. Journal of Lanzhou Jiaotong University Natural Science,2019,38(1):26-31.(in Chinese)
[22] HUANG Zheng, TU Yongming, MENG Shaoping, et al. A practical method for predicting shear deformation of reinforced concrete beams[J]. Engineering Structures, 2020, 206:110116.

相似文献/References:

[1]朱美春,刘建新,王清湘.钢骨-方钢管高强混凝土柱的轴压比限值[J].深圳大学学报理工版,2010,27(1):95.
 ZHU Mei-chun,LIU Jian-xin,and WANG Qing-xiang.Axial load limit for square steel tubes filled with steel-reinforced high-strength concrete[J].Journal of Shenzhen University Science and Engineering,2010,27(5):95.
[2]周海俊,米红雨,谭也平.锈蚀-疲劳作用下的砼梁桥失效概率分析[J].深圳大学学报理工版,2010,27(1):109.
 ZHOU Hai-jun,MI Hong-yu,and TAN Ye-ping.Failure probability analysis of reinforced concrete bridges under coupled corrosion fatigue effects[J].Journal of Shenzhen University Science and Engineering,2010,27(5):109.
[3]陈驹,邢锋,赵羽习,等.锈蚀钢混梁的受弯挠度和裂缝计算[J].深圳大学学报理工版,2010,27(4):447.
 CHEN Ju,XING Feng,ZHAO Yu-xi,et al.Deflection and crack calculation of corroded reinforced concrete beams[J].Journal of Shenzhen University Science and Engineering,2010,27(5):447.
[4]白音,石永久,王元清.火灾中网架结构受力分析与设计方法[J].深圳大学学报理工版,2011,28(No.2(095-188)):113.
 BAI Yin,SHI Yong-jiu,and WANG Yuan-qing.Mechanical properties analysis and design method for grid structures under fire conditions[J].Journal of Shenzhen University Science and Engineering,2011,28(5):113.
[5]管民生,韩大建,杜宏彪,等.钢筋混凝土框架结构的抗震性能指标研究[J].深圳大学学报理工版,2011,28(No.3(189-282)):200.
 GUAN Min-sheng,HAN Da-jian,DU Hong-biao,et al.A new seismic performance index for reinforced concrete frame structures[J].Journal of Shenzhen University Science and Engineering,2011,28(5):200.
[6]蔡健,林焕彬,侯磊,等.带约束拉杆矩形钢管混凝土短柱延性分析[J].深圳大学学报理工版,2011,28(No.3(189-282)):213.
 CAI Jian,LIN Huan-bin,HOU Lei,et al.Analysis of ductility of rectangular concrete-filled steel tube stub columns with binding bars subjected to eccentric loading[J].Journal of Shenzhen University Science and Engineering,2011,28(5):213.
[7]方明霁,李国强,李一松.型钢混凝土中高剪力墙的抗震性能[J].深圳大学学报理工版,2012,29(No.1(001-094)):38.[doi:10.3724/SP.J.1249.2012.01038]
 FANG Ming-ji,LI Guo-qiang,and LI Yi-song.Seismic behavior of steel reinforced concrete mid-rise shear wall[J].Journal of Shenzhen University Science and Engineering,2012,29(5):38.[doi:10.3724/SP.J.1249.2012.01038]
[8]蔡健,梁伟盛,林辉.方钢管混凝土柱抗剪性能试验研究[J].深圳大学学报理工版,2012,29(No.3(189-282)):189.[doi:10.3724/SP.J.1249.2012.03189]
 CAI Jian,LIANG Wei-sheng,et al.Experimental study on shear resistance performance of concrete filled square steel tubular columns[J].Journal of Shenzhen University Science and Engineering,2012,29(5):189.[doi:10.3724/SP.J.1249.2012.03189]
[9]张成,吴慧,高博青,等.肋环型索穹顶结构的几何法施工及工程应用[J].深圳大学学报理工版,2012,29(No.3(189-282)):195.[doi:10.3724/SP.J.1249.2012.03195]
 ZHANG Cheng,WU Hui,GAO Bo-qing,et al.Geometry-based construction technique and application of Geiger type cable dome[J].Journal of Shenzhen University Science and Engineering,2012,29(5):195.[doi:10.3724/SP.J.1249.2012.03195]
[10]陆金钰,李娜,范圣刚.面向几何坐标的张拉整体结构找形算法[J].深圳大学学报理工版,2012,29(No.3(189-282)):211.[doi:10.3724/SP.J.1249.2012.03211]
 LU Jin-yu,LI Na,and FAN Sheng-gang.Geometry-oriented form-finding method for tensegrity[J].Journal of Shenzhen University Science and Engineering,2012,29(5):211.[doi:10.3724/SP.J.1249.2012.03211]
[11]胡铖玥,杨泳,杨鹏飞,等.小剪跨比碳纤维布抗剪加固梁的有限元分析[J].深圳大学学报理工版,2019,36(1):87.[doi:10.3724/SP.J.1249.2019.01087]
 HU Chengyue,YANG Yong,YANG Pengfei,et al.Numerical modeling of FRP shear strengthened deep beams[J].Journal of Shenzhen University Science and Engineering,2019,36(5):87.[doi:10.3724/SP.J.1249.2019.01087]

备注/Memo

备注/Memo:
Received:2020-11-13;Accepted:2021-05-11;Online(CNKI):2021-09-01
Foundation:National Natural Science Foundation of China (51878414, 52008255)
Corresponding author:Assistant professor HU Biao.E-mail: biaohu3-c@szu.edu.cn
Citation:ZHOU Yingwu, HU Zhiheng, HU Biao.Shear behavior of reinforced concrete beam with local enhancement in compression zone[J]. Journal of Shenzhen University Science and Engineering, 2021, 38(5): 479-488.(in Chinese)
基金项目:国家自然科学基金资助项目(51878414,52008255)
作者简介:周英武(1978—),深圳大学特聘教授、博士生导师.研究方向:FRP-混凝土结构、绿色与高性能(高韧性)混凝土、混凝土结构耐久性与延性.E-mail:ywzhou@szu.edu.cn
引文:周英武,胡智恒,胡彪.受压区局部增强的钢筋混凝土梁抗剪性能[J]. 深圳大学学报理工版,2021,38(5):479-488.
更新日期/Last Update: 2021-09-30