[1]王炎松,王陈高男.工业遗产钢结构的激光清洗及保护[J].深圳大学学报理工版,2020,37(5):466-473.[doi:10.3724/SP.J.1249.2020.05466]
 WANG Yansong and WANG Chengaonan,Laser cleaning and protection of industrial heritage steel structure[J].Journal of Shenzhen University Science and Engineering,2020,37(5):466-473.[doi:10.3724/SP.J.1249.2020.05466]
点击复制

工业遗产钢结构的激光清洗及保护()
分享到:

《深圳大学学报理工版》[ISSN:1000-2618/CN:44-1401/N]

卷:
第37卷
期数:
2020年第5期
页码:
466-473
栏目:
光电工程
出版日期:
2020-09-15

文章信息/Info

Title:
Laser cleaning and protection of industrial heritage steel structure
文章编号:
202005003
作者:
王炎松1王陈高男1 2
1)武汉大学城市设计学院,湖北武汉 430070
2)湖北省交通规划设计院股份有限公司,湖北武汉 430051
Author(s):
WANG Yansong1 and WANG Chen’gaonan1 2
1) School of Urban Design, Wuhan University, Wuhan 430070, Hubei Province, P.R.China
2) Hubei Provincial Communications Planning and Design Institute Co. Ltd., Wuhan 430051, Hubei Province, P.R.China
关键词:
光学工程工业遗产钢结构激光清洗连续激光脉冲激光
Keywords:
optical engineering industrial heritage steel structure laser cleaning continuous-wave laser pulsed laser
分类号:
O439; O437
DOI:
10.3724/SP.J.1249.2020.05466
文献标志码:
A
摘要:
工业遗产建筑钢结构的锈蚀会造成钢材能源的大量浪费及工业遗产的遗失,其清洗与保护工作面临严峻挑战. 采用新型、环保的激光清洗方式对工业遗产建筑钢结构进行清洗及保护,通过连续-脉冲激光的两步作用,实现厚层钢材锈蚀物高效率及高精度的清洗,同时还能够在钢材表面主动形成氧化物对钢材进行保护. 通过金相显微镜、扫描电子显微镜配合能谱仪及粗糙度计等测量方式,对清洗前后的样品进行对比分析. 该研究利用新型能源进行工业遗产的清洗保护,可为工业遗产保护开辟新道路,并为资源节约提供新方案.
Abstract:
The corrosion of industrial heritage steel structure causes a large amount of waste of steel and damage to the industrial heritage. The cleaning and protection of the industrial heritage steel structure are facing severe challenges. We propose an environment-friendly laser cleaning method to clean and to protect the industrial heritage steel structure. By using the two-step continuous pulse laser cleaning method, a cleaning of the thick structure steel corrosion with high-efficiency and high-precision is realized. At the same time, this method can form oxides on the steel structure surface to protect the steel structure. The metallographic microscopy (MM), scanning electron microscopy (SEM) with energy-dispersive X-ray spectroscopy (EDS) and roughness meters are used to study the steel surface before and after the laser cleaning. The experimental results show that the laser cleaning method can provide a new solution for resource conservation and open a new path for the protection of industrial heritage, which has important guiding significance.

参考文献/References:

[1] 张启富,郝晓东.钢结构腐蚀防护现状和发展[J].中国建筑金属结构,2006(9):22-26.
ZHANG Qifu, HAO Xiaodong. Present situation and development of corrosion protection of steel structure[J]. China Construction Metal Structure, 2006(9):22-26.(in Chinese)
[2] 沈祖炎.钢结构制作安装手册[M].北京:中国建筑工业出版社,1998.
SHEN Zuyan. Steel structure production and installation manual[M]. Beijing: China Construction Industry Press, 1998.(in Chinese)
[3] 中国钢结构协会.建筑钢结构施工手册[M].北京:中国计划出版社,2004.
China Steel Structure Association. Construction manual of building steel structure[M]. Beijing: China Planning Press, 2004.(in Chinese)
[4] 黄淑菊. 金属腐蚀与防护[M]. 西安: 西安交通大学出版社,1988:97-98.
HUANG Shuju. Metal corrosion and protection[M]. Xi’an: Xi’an Jiaotong University Press, 1988: 97-98.(in Chinese)
[5] 任云兰, 郭力君. 天津工业遗产保护和利用的探索与实践[J].城市发展研究, 2018,25(10): C16-C19, C31.
REN Yunlan, GUO Lijun. Exploration and practice of protection and utilization of industrial heritage in Tianjin[J]. Urban Development Studies, 2018, 25(10): C16-C19, C31.(in Chinese)
[6] 侯玫, 张传俊. 现代工业中几种先进除锈方法的对比研究[J]. 机械研究与应用, 2007, 20(4): 19-20.
HOU Mei, ZHANG Chuanjun. A comparative research on several advanced way of removing rust in modern industry[J]. Mechanical Research & Application, 2007, 20(4): 19-20.(in Chinese)
[7] BUCCOLIERI G, NASSISI V, BUCCOLIERI A, et al. Laser cleaning of a bronze bell[J]. Applied Surface Science, 2013, 272: 55-58.
[8] 雷正龙, 田泽, 陈彦宾. 工业领域的激光清洗技术[J].激光与光电子学进展, 2018, 55(3): 030005.
LEI Zhenglong, TIAN Ze, CHEN Yanbin. Laser cleaning technology in industrial fields[J]. Laser & Optoelectronics Progress, 2018, 55(3): 030005.(in Chinese)
[9] JIA Xianshi, ZHANG Yudong, CHEN Yongqian, et al. Laser cleaning of slots of chrome-plated die[J]. Optics & Laser Technology, 2019, 119: 105659.
[10] PINI R, SIANO S, SALIMBENI R, et al. Tests of laser cleaning on archeological metal artefacts[J]. Journal of Cultural Heritage, 2000, 1(Suppl.1): S129-S137.
[11] POZO-ANTONIO J S, RIVAS T, LPEZ A J, et al. Effectiveness of granite cleaning procedures in cultural heritage: a review[J]. Science of the Total Environment, 2016, 571: 1017-1028.
[12] ORTIZ P, ANT U'NEZ V, ORTIZ R, et al. Comparative study of pulsed laser cleaning applied to weathered marble surfaces[J]. Applied Surface Science, 2013, 283: 193-201.
[13] SALIMBENI R, PINI R, SIANO S. Achievement of optimum laser cleaning in the restoration of artworks: expected improvements by on-line optical diagnostics[J]. Spectrochimica Acta Part B: Atomic Spectroscopy, 2001, 56(6): 877-885.
[14] LING Xiulan, WANG Gao, ZHANG Chen. Investigation of laser cleaning on bronze cultural relics[J]. Laser Physics, 2016, 26(5): 055603.
[15] 颜红,花银群,陈瑞芳,等. 激光冲击强化铁镍合金摩擦磨损性能的研究[J]. 中国激光,2010,37(增刊1):364-367.
YAN Hong, HUA Yinqun, CHEN Ruifang, et al. Study on the tribological and wear behavior of FeNi alloy treated by laser shock processing[J]. Chinese Journal of Lasers, 2010, 37(Suppl.1): 364-367.(in Chinese)
[16] 任旭东, 张田, 张永康, 等. 激光冲击处理提高00Cr12合金的疲劳性能[J]. 中国激光, 2010, 37(8):2111-2115.
REN Xudong, ZHANG Tian, ZHANG Yongkang, et al. Improving fatigue properties of 00cr12 alloy by laser shock processing[J]. Chinese Journal of Lasers, 2010, 37(8):2111-2115.(in Chinese)
[17] LI Wei, DU Peng, ZHANG Jun, et al. Passivation process in quasi-continuous laser derusting with intermediate pulse width and line-scanning method[J]. Applied Optics, 2014, 53(6): 1103-1109.
[18] LEITZ K H, KOCH H, OTTO A, et al. Numerical simulation of process dynamics during laser beam drilling with short pulses[J]. Applied Physics A, 2012, 106(4): 885-891.
[19] 邱兆飚, 朱海红. 脉冲激光除锈工艺研究[J]. 应用激光, 2013, 33(4): 416-420.
QIU Zhaobiao, ZHU Haihong. Process parameter study on the removing rust using pulsed laser[J]. Applied Laser, 2013, 33(4): 416-420.(in Chinese)
[20] GUO H, MARTUKANITZ R, DEBROY T. Laser assisted cleaning of oxide films on SUS409 stainless steel[J]. Journal of Laser Applications, 2004, 16(4): 236-244.
[21] CHOUBEY A, SINGH A, MODI M H, et al. Study on effective cleaning of gold layer from fused silica mirrors using nanosecond-pulsed Nd∶YAG laser[J]. Applied Optics, 2013, 52(31): 7540-7548.
[22] GUAN Y C, NG G K L, ZHENG H Y, et al. Laser surface cleaning of carbonaceous deposits on diesel engine piston[J]. Applied Surface Science, 2013, 270: 526-530.
[23] KE L, ZHU Haihong, LEI Wenjuan, et al. Laser cleaning of rust on ship steel using TEA CO2 pulsed laser[C]// Photonics and Optoelectronics Meetings (POEM) 2009. Wuhan, China: SPIE, 2009, 7515: 75150G.
[24] 韩 强, 安幸, 邓金花. 中国工业遗产保护发展历程[J].工业建筑, 2018,48(8): 8-12.
HAN Qiang, AN Xing, DENG Jinhua. The development process of Chinese industrial heritage protection[J]. Industrial Construction, 2018, 48(8): 8-12.(in Chinese)
[25] WANG Zemin, ZENG Xiaoyan, HUANG Weiling. Mechanism research of laser cleaning rubber layer on tire mold[C]// International Conference on Industrial Lasers. Wuhan, China: SPIE, 1999, 3862: 514-518.
[26] OSTICIOLI I, SIANO S. Dependence of Nd∶YAG laser derusting and passivation of iron artifacts on pulse duration[C]// International Conference on Fundamentals of Laser-Assisted Micro- and Nanotechnologies. St Petersburg, Russian: SPIE, 2013, 9065: 906513.
[27] 李伟. 激光清洗锈蚀的机制研究和设备开发[D].天津: 南开大学, 2014.
LI Wei. Research on mechanisms of laser rust removal and manufacture of laser cleaning devices[D]. Tianjin: Nankai University, 2014.(in Chinese)
[28] LV Xueming, PAN Yunxiang, JIA Zhichao, et al. Laser-induced damage threshold of silicon under combined millisecond and nanosecond laser irradiation[J]. Journal of Applied Physics, 2017, 121(11): 113102.

相似文献/References:

[1]李春波,余春晖,柴金龙,等.超高速摄影仪转镜模态数值仿真分析[J].深圳大学学报理工版,2011,28(No.6(471-564)):513.
 LI Chun-bo,YU Chun-hui,CHAI Jin-long,et al.Modal analysis through numerical and experimental methods for rotating mirror of ultra-high speed camera[J].Journal of Shenzhen University Science and Engineering,2011,28(5):513.
[2]李春波,余春晖,李景镇,等.基于拓扑理论的超高速摄影仪转镜结构设计[J].深圳大学学报理工版,2012,29(No.4(283-376)):304.[doi:10.3724/SP.J.1249.2012.04304]
 LI Chun-bo,YU Chun-hui,LI Jing-zhen,et al.Structure design of rotating mirror based on the topology optimization theory for ultra-high speed camera[J].Journal of Shenzhen University Science and Engineering,2012,29(5):304.[doi:10.3724/SP.J.1249.2012.04304]
[3]雷耀虎,刘鑫,郭金川,等.超声对X射线分析光栅铋填充率影响研究[J].深圳大学学报理工版,2016,33(2):138.[doi:10.3724/SP.J.1249.2016.02138]
 Lei Yaohu,Liu Xin,Guo Jinchuan,et al.Influence of ultrasonic on filling ratio of Bi in X-ray analyzer gratings[J].Journal of Shenzhen University Science and Engineering,2016,33(5):138.[doi:10.3724/SP.J.1249.2016.02138]
[4]雷耀虎,黄建衡,刘鑫,等.X射线微分相衬成像系统莫尔条纹对比度的改善[J].深圳大学学报理工版,2016,33(5):506.[doi:10.3724/SP.J.1249.2016.05506]
 Lei Yaohu,Huang Jianheng,Liu Xin,et al.Improvement of visibility of moiré fringe in X-ray differential phase-contrast imaging[J].Journal of Shenzhen University Science and Engineering,2016,33(5):506.[doi:10.3724/SP.J.1249.2016.05506]
[5]王冬冬,谢晓华,任席奎,等.1 764 nm调Q锁模自拉曼激光器研究[J].深圳大学学报理工版,2016,33(5):501.[doi:10.3724/SP.J.1249.2016.05501]
 Wang Dongdong,Xie Xiaohua,Ren Xikui,et al.Study on Q-switched and mode-locked self-Raman laser at 1 764[J].Journal of Shenzhen University Science and Engineering,2016,33(5):501.[doi:10.3724/SP.J.1249.2016.05501]
[6]黄建衡,雷耀虎,刘鑫,等.X射线大视场相衬成像位移误差的数值分析[J].深圳大学学报理工版,2017,34(1):8.[doi:10.3724/SP.J.1249.2017.01008]
 Huang Jianheng,Lei Yaohu,Liu Xin,et al.Numerical analysis of shift error in X-ray phase contrast imaging for large field of view[J].Journal of Shenzhen University Science and Engineering,2017,34(5):8.[doi:10.3724/SP.J.1249.2017.01008]
[7]洪振厚,周彬,郭金川.锥束X射线CT图像重建的新型滤波函数[J].深圳大学学报理工版,2017,34(3):284.[doi:10.3724/SP.J.1249.2017.03284]
 Hong Zhenhou,Zhou Bin,and Guo Jinchuan.A new filter function for the image reconstruction of cone beam X-ray CT[J].Journal of Shenzhen University Science and Engineering,2017,34(5):284.[doi:10.3724/SP.J.1249.2017.03284]
[8]刘伟,刘双龙,陈丹妮,等.CARS显微成像系统的空间分辨率标定[J].深圳大学学报理工版,2017,34(3):272.[doi:10.3724/SP.J.1249.2017.03272]
 Liu Wei,Liu Shuanglong,Chen Danni,et al.Three-dimensional spatial resolution calibration of the coherent anti-Stokes Raman scattering microscopy[J].Journal of Shenzhen University Science and Engineering,2017,34(5):272.[doi:10.3724/SP.J.1249.2017.03272]
[9]李恒,陈丹妮,于斌,等.DH-PSF三维动态多粒子追踪在活细胞成像的应用[J].深圳大学学报理工版,2017,34(5):526.[doi:10.3724/SP.J.1249.2017.05526]
 Li Heng,Chen Danni,et al.Application of DH-PSF three-dimensional dynamic multi-particle tracking method in living cell imaging[J].Journal of Shenzhen University Science and Engineering,2017,34(5):526.[doi:10.3724/SP.J.1249.2017.05526]
[10]章瑛,郑吉林,齐红基,等.多层介质薄膜的陡边设计与研究[J].深圳大学学报理工版,2018,35(5):484.[doi:10.3724/SP.J.1249.2018.05484]
 ZHANG Ying,ZHENG Jilin,QI Hongji,et al.Design and research of steep side of the multi-layer dielectric thin films[J].Journal of Shenzhen University Science and Engineering,2018,35(5):484.[doi:10.3724/SP.J.1249.2018.05484]

备注/Memo

备注/Memo:
Received:2019-11-19;Accepted:2020-04-27
Foundation:National Natural Science Foundation of China (51508421)
Corresponding author:Professor WANG Yansong.E-mail: 875778984@qq.com
Citation:WANG Yansong,WANG Chen’gaonan.Laser cleaning and protection of industrial heritage steel structure[J]. Journal of Shenzhen University Science and Engineering, 2020, 37(5): 466-473.(in Chinese)
基金项目:国家自然科学基金资助项目 (51508421)
作者简介:王炎松(1969—),武汉大学教授、博士生导师. 研究方向:乡土建筑. E-mail: 875778984@qq.com
引文:王炎松,王陈高男.工业遗产钢结构的激光清洗及保护[J]. 深圳大学学报理工版,2020,37(5):466-473.
更新日期/Last Update: 2020-07-26