[1]余春晖,黄虹宾.军用车辆离合器半接合点模糊控制试验研究[J].深圳大学学报理工版,2014,31(6):647-653.[doi:10.3724/SP.J.1249.2014.06647]
 Yu Chunhui and Huang Hongbin.Fuzzy control for half junction point of AMT clutch used on military vehicles[J].Journal of Shenzhen University Science and Engineering,2014,31(6):647-653.[doi:10.3724/SP.J.1249.2014.06647]
点击复制

军用车辆离合器半接合点模糊控制试验研究()
分享到:

《深圳大学学报理工版》[ISSN:1000-2618/CN:44-1401/N]

卷:
第31卷
期数:
2014年第6期
页码:
647-653
栏目:
自控精仪
出版日期:
2014-11-20

文章信息/Info

Title:
Fuzzy control for half junction point of AMT clutch used on military vehicles
文章编号:
20140614
作者:
余春晖1 黄虹宾2
1) 深圳职业技术学院汽车与交通学院, 深圳 518055
2)深圳大学机电与控制工程学院, 深圳 518060
Author(s):
Yu Chunhui1 and Huang Hongbin2
1) School of Automotive and Transportation, Shenzhen Polytechnic, Shenzhen 518055, P.R.China
2) College of Mechatronics and Control Engineering, Shenzhen University, Shenzhen 518060, P.R.China
关键词:
公路运输电控机械式自动变速器离合器半接合点模糊控制油门踏板变速箱
Keywords:
highway transportation automatic mechanical transmission clutch half joint fuzzy control accelerator pedal transmission
分类号:
U 463.212
DOI:
10.3724/SP.J.1249.2014.06647
文献标志码:
A
摘要:
运用模糊控制原理,采用Motorola MC68376微处理器和霍尔效应零速传感器,对某型军用车辆离合器半接合点附近区域进行精确控制,基本消除离合器起步冲击,减小离合器的滑磨,使车辆能自动适应驾驶员的起步意图与不同的路面阻力,尤其是在驾驶员实施快起步意图与大路面阻力方面,达到平稳控制车辆起步的目的.
Abstract:
Based on fuzzy control theory, the Motorola MC68376 microprocessor and Hall-effect zero-speed sensor were used to measure and control accurately the values of half junction point of automatic mechanical transmission (AMT) clutch used on military vehicles. The experimental results show that the vehicle can automatically respond to the start intents of drivers and road conditions because the start stock of clutch is eliminated on the whole, and the slip fray is abated. Especially,the aim of smooth start is achieved when fast start acts and big resistance exists on road.

参考文献/References:

[1] Chen Jiarui. Construction of automobile[M]. Beijing: China Mechine Press, 2009.(in Chinese)
陈家瑞. 汽车构造[M]. 北京: 机械工业出版社, 2009.
[2] Zeng Guangqi. Fuzzy control theory and engineering application[M]. Wuhan: Huazhong University of Science and Technology Press, 2006.(in Chinese)
曾光奇.模糊控制理论与工程应用[M]. 武汉: 华中科技大学出版社, 2006.
[3] Xie Jijian. Methord of fuzzy mathematics and application[M]. Wuhan: Huazhong University of Science and Technology Press, 2006.(in Chinese)
谢继坚. 模糊数学方法及其应用[M], 武汉: 华中科技大学出版社, 2006.
[4] Ge Shun, Ge Anlin, Wu Wenzhi. Fuzzy control of automatic transmission clutch[J]. Automobile Technology, 1996(6):7-12.(in Chinese)
葛舜, 葛安林, 武文治. 自动变速离合器的模糊控制[J]. 汽车技术,1996(6): 7-12.
[5] Li Fan. The processing system of fuzzy information [M]. Beijing: Beijing University Press, 1988.(in Chinese)
李凡. 模糊信息处理系统[M]. 北京: 北京大学出版社, 1988.
[6] Huang Jianming, Cao Changxiu, Su Yugang. The clutch control of automobile starting process[J]. Journal of Chongqing University Natural Science Edition, 2005, 28(3): 91-94.(in Chinese)
黄建明,曹长修,苏玉刚. 汽车起步过程的离合器控制[J]. 重庆大学学报自然科学版, 2005, 28(3): 91-94.
[7] Wang Yuncheng, Shi Guobiao, Yu Haitao, et al. The fuzzy control of AMT clutch[J]. Transactions of the Chinese Society for Agricultural Machinery, 2000, 31(6): 31-35.(in Chinese)
王云成, 施国标, 于海涛, 等. 机械式自动变速器系统的离合器起步模糊控制[J]. 农业机械学报, 2000, 31(6): 31-35.

[8] Cao Guijun, Ge Anlin, Zheng Lei. The research of clutch meet in process of AMT shifting[J]. Chinese Journal of Mechanical Engineering, 2005, 41(12): 234-238.(in Chinese)
曹桂军, 葛安林, 郑 磊. 电控机械式自动变速器换挡过程中离合器的接合研究[J]. 机械工程学报, 2005, 41(12): 234-238.
[9] Shi Jian, Zhuo Bin. The simulation and experiment research of clutch operating characteristics in starting process[J]. Automotive Engineering, 2000, 22(4): 270-273.(in Chinese)
石坚, 卓斌. 车辆起步时驾驶员离合器操作特性的仿真与实验研究[J]. 汽车工程, 2000, 22(4): 270-273.
[10] Yan Kezhi, Fang Zongde, Zhang Guosheng. The research of stability analysis in vehicle’s clutch meet process[J]. Mechanical Science and Technology for Aerospace Engineering, 2007, 26(5): 615-618.(in Chinese)
颜克志, 方宗德, 张国胜. 汽车离合器接合过程中的稳定性分析研究[J]. 机械科学与技术, 2007, 26(5): 615-618.
[11] He Ren, Liu Wenguang, Huang Daxing. The control strategy of clutch control in starting process on different road load[J]. Journal of Jiangsu University Natural Science Edition, 2009, 30(5):459-462.(in Chinese)
何仁, 刘文光, 黄大星. 不同道路负荷的AMT车辆起步过程离合器控制策略[J]. 江苏大学学报自然科学版, 2009, 30(5): 459-462.
[12] Zhao Wenlong, Li Libin. The research and analysis of clutch starting process law based on simulation[J]. Manufacturing Automation, 2009, 31(11): 104-107.(in Chinese)
赵文龙, 李立斌. 基于仿真的离合器起步规律研究及分析[J]. 制造业自动化, 2009, 31(11): 104-107.

相似文献/References:

[1]韩彪,聂伟,王卫平,等.基于公交车站的可达性度量模型[J].深圳大学学报理工版,2013,30(No.1(001-110)):98.[doi:10.3724/SP.J.1249.2013.01098]
 Han Biao,Nie Wei,Wang Weiping,et al.Accessibility measurement model based on bus stop[J].Journal of Shenzhen University Science and Engineering,2013,30(6):98.[doi:10.3724/SP.J.1249.2013.01098]
[2]马捷,李津,程琳.客货分离道路系统的车辆分类标准和评价方法[J].深圳大学学报理工版,2015,32(5):524.[doi:10.3724/SP.J.1249.2015.05524]
 Ma Jie,Li Jin,and Cheng Lin.Vehicle classification and evaluation method of separating trucks from passenger vehicles[J].Journal of Shenzhen University Science and Engineering,2015,32(6):524.[doi:10.3724/SP.J.1249.2015.05524]
[3]万霞,黄文伟,强明明.深圳市乘用车道路行驶工况构建[J].深圳大学学报理工版,2016,33(3):281.[doi:10.3724/SP.J.1249.2016.03281]
 Wan Xia,Huang Wenwei,et al.Construction of driving cycle for passenger vehicles in Shenzhen[J].Journal of Shenzhen University Science and Engineering,2016,33(6):281.[doi:10.3724/SP.J.1249.2016.03281]
[4]王长海,肖亮亮.公路选线中的嵌套山体自动提取技术[J].深圳大学学报理工版,2019,36(5):576.[doi:10.3724/SP.J.1249.2019.05576]
 WANG Changhai and XIAO Liangliang.Automatic extraction of nested mountain in highway route selection[J].Journal of Shenzhen University Science and Engineering,2019,36(6):576.[doi:10.3724/SP.J.1249.2019.05576]
[5]奚宽响,查伟雄,等.旅游城镇路网多目标优化模型及算法设计[J].深圳大学学报理工版,2020,37(2):130.[doi:10.3724/SP.J.1249.2020.02130]
 XI Kuanxiang,ZHA Weixiong,LI Jian,et al.Multi-objective optimization model and algorithm design of road network in tourist town[J].Journal of Shenzhen University Science and Engineering,2020,37(6):130.[doi:10.3724/SP.J.1249.2020.02130]
[6]潘福全,邢英,魏金丽,等.基于开放街区的车辆行驶最优路径设计[J].深圳大学学报理工版,2020,37(2):143.[doi:10.3724/SP.J.1249.2020.02143]
 PAN Fuquan,XING Ying,WEI Jinli,et al.Optimal route design of vehicle driving path based on open blocks[J].Journal of Shenzhen University Science and Engineering,2020,37(6):143.[doi:10.3724/SP.J.1249.2020.02143]

备注/Memo

备注/Memo:
Received:2014-06-05;Accepted:2014-09-12
Foundation:National Natural Science Foundation of China (60978039)
Corresponding author:Associate professor Yu Chunhui.E-mail:yuchunhui@szpt.edu.cn
Citation:Yu Chunhui, Huang Hongbin. Fuzzy control for half junction point of AMT clutch used on military vehicles[J]. Journal of Shenzhen University Science and Engineering, 2014, 31(6): 647-653.(in Chinese)
基金项目:国家自然科学基金资助项目(60978039)
作者简介:余春晖(1977—),女(汉族),湖南省长沙市人,深圳职业技术学院副教授.E-mail:yuchunhui@szpt.edu.cn
引文:余春晖, 黄虹宾. 军用车辆离合器半接合点模糊控制试验研究[J]. 深圳大学学报理工版,2014,31(6):647-653.
更新日期/Last Update: 2014-10-29