[1]徐勤超,王树宗,练永庆.水下航行器底端开槽固体药柱燃烧模型与仿真[J].深圳大学学报理工版,2011,28(No.6(471-564)):478-482.
 XU Qin-chao,WANG Shu-zong,and LIAN Yong-qing.Burning model and simulation for bottom slotted grain of underwater vehicle[J].Journal of Shenzhen University Science and Engineering,2011,28(No.6(471-564)):478-482.
点击复制

水下航行器底端开槽固体药柱燃烧模型与仿真()
分享到:

《深圳大学学报理工版》[ISSN:1000-2618/CN:44-1401/N]

卷:
第28卷
期数:
2011年No.6(471-564)
页码:
478-482
栏目:
电子与信息科学
出版日期:
2011-11-20

文章信息/Info

Title:
Burning model and simulation for bottom slotted grain of underwater vehicle
文章编号:
1000-2618(2011)06-0478-05
作者:
徐勤超王树宗练永庆
海军工程大学海军兵器新技术应用研究所,武汉 430033
Author(s):
XU Qin-chaoWANG Shu-zongand LIAN Yong-qing
Research Institute of New Weaponry Technology and Application, Naval University of Engineering, Wuhan 430033, P. R. China
关键词:
燃烧学水下航行器固体药柱燃烧模型燃面推移
Keywords:
combustionunderwater vehiclegrainburning modelmoving burning surface
分类号:
TJ 630.2;V 421.4
文献标志码:
A
摘要:
分析水下航行器固体药柱结构,根据几何燃烧定律,对药柱燃面推移情况进行研究,建立了底端开槽固体药柱的燃烧模型,运用仿真技术分析凹槽大小对药柱燃烧过程的影响.结果表明,该模型可模拟水下航行器药柱的燃烧过程,为其结构设计和优化及点火过程提供了可靠依据.
Abstract:
A burning model of the grain for underwater vehicle based on the geometry burning law was proposed. It was with the analysis of the burning surface and the actual structure. The effect of the slot size on burning process is studied with various simulations. The simulation results have demonstrated that this model is valid in the optimal design of the structure of the grain and in the analysis of the process of burning on the engine.

参考文献/References:

[1]张进军,钱志博,杨杰. 水下航行器热动力系统固体药柱燃烧模型与仿真[J]. 兵工学报,2006,27(5):818-820.
[2]纪军,何长富. 燃烧室初始燃烧容积对固体药柱燃烧过程的影响[J]. 舰船科学技术,1994(4):17-30.
[3]马世杰. 鱼雷热动力装置设计原理[M]. 北京:兵器工业出版社,1992:36-40.
[4]王春利,孙维申,邹广宝. 开槽管形装药(减面形)的设计与应用研究[J]. 固体火箭技术,1996,19(3):41-43.
[5]师海潮,赵卫兵,赵宽明. 三组元推进剂动力系统固体药柱技术研究[J]. 鱼雷技术,2001,9(4):37-39.
[6]杨东,丁振东,史小锋. 启动过程液体燃料进入燃烧室时间的选择[J]. 鱼雷技术,2001,9(2):33-35.
[7]刘 旸,鲍福廷,蔡强,等. 基于GPU计算架构的体素离散化复杂药柱燃面计算方法[J]. 固体火箭技术,2011,34(1):18-21.
[8]孙国南,马拯. 固体火箭发动机药柱几何燃面退移仿真及程序实现[J]. 装备制造技术, 2010(2):11-13.


[1]ZHANG Jin-jun,QIAN Zhi-bo,YANG Jie. Burning model and simulation of solid ignition grain of thermal power underwater vehicle system[J]. Acta Armamentarii,2006,27(5):818-820.(in Chinese)
[2]JI Jun,HE Chang-fu. The effect of the burning process with different initial combustor volumes[J]. Ship Science and Technology,1994(4):17-30.(in Chinese)
[3]MA Shi-jie. Design Principle for Torpedo Thermal Equipment[M]. Beijing:Armament Industry Press,1992:36-40.(in Chinese)
[4]WANG Chun-li,SUN Wei-shen,ZOU Guang-bao. Study and design on slotted-tube grain of propellent[J]. Journal of Solid Rocket Technology,1996,19(3):41-43.(in Chinese)
[5]SHI Hai-chao,ZHAO Wei-bing,ZHAO Kuan-ming. Study of solid grain for tri-propellant of thermal power[J]. Torpedo Technology,2001,9(4):37-39.(in Chinese)
[6]YANG Dong,DING Zhen-dong,SHI Xiao-feng. The choice of time for fuel entering into combustor in the process of engine starting[J]. Torpedo Technology,2001,9(2):33-35.(in Chinese)
[7]LIU Yang,BAO Fu-ting,CAI Qiang, et al. GPU computing architecture-based discrete voxelized burning surface calculation method for complex SRM grains[J]. Journal of Solid Rocket Technology,2011,34(1):18-21.(in Chinese)
[8]SUN Guo-nan,MA Zheng. The chievement of solid rocket motor grain geometry burning surface back-shift simulation and procedures[J]. Equipment Manufacturing Technology,2010(2):11-13.(in Chinese)

备注/Memo

备注/Memo:
收稿日期:2011-02-13;修回日期:2011-08-10
基金项目:国家自然科学基金资助项目(51009142)
作者简介:徐勤超(1982-),男(汉族),湖北省天门市人,海军工程大学博士研究生.E-mail:hangyuandulang@163.com
通讯作者:王树宗(1938-),男(汉族),海军工程大学教授、博士生导师. E-mail:wangshuzong@163.com
更新日期/Last Update: 2011-11-22