[1]袁清珂,刘大慧,张明天,等.芯片键合机传送机构及其虚拟样机研究[J].深圳大学学报理工版,2009,26(2):188-192.
 YUAN Qing-ke,LIU Da-hui,ZHANG Ming-tian,et al.The feeder mechanism of a die bonder and its virtual prototype[J].Journal of Shenzhen University Science and Engineering,2009,26(2):188-192.
点击复制

芯片键合机传送机构及其虚拟样机研究()
分享到:

《深圳大学学报理工版》[ISSN:1000-2618/CN:44-1401/N]

卷:
第26卷
期数:
2009年2期
页码:
188-192
栏目:
自控精仪
出版日期:
2009-04-30

文章信息/Info

Title:
The feeder mechanism of a die bonder and its virtual prototype
文章编号:
1000-2618(2009)02-0188-05
作者:
袁清珂刘大慧张明天颜旭晖成思源
广东工业大学机电工程学院,广州 510006
Author(s):
YUAN Qing-keLIU Da-huiZHANG Ming-tianYAN Xu-huiand CHENG Si-yuan
College of Mechanical and Electrical Engineering,Guangdong University of Technology,Guangzhou 510090,P.R.China
关键词:
键合机传送机构夹持机构运动学虚拟样机
Keywords:
die bonderfeeder mechanismholding feeder mechanismkinematicsvirtual prototyping
分类号:
TH 122;TH 134
文献标志码:
A
摘要:
利用伺服电机和气缸作为动力源,研发夹持传送机构,实现引线框架的进给动作.为优化和验证设计的正确性和合理性,开发传送机构的虚拟样机仿真模型,并进行传送机构的运动学和动力学仿真,研究传送机构的设计与改进.所开发的传送机构已应用到整机设备开发中,能满足整机功能和性能要求,已小批量生产.
Abstract:
With analyzing and discussing the current feeder mechanisms of LED die bonders,a new feeder mechanism was designed and developed using the servo motor and air cylinder as the power source. According to the requirement of the whole equipment design and development,the mechanism can hold and loosen the lead-frame for the feeding motion.In order to optimize and verify whether the mechanism was approriate and rational,virtual prototype simulation models of the mechanism were established,kinematics characteristics of the mechanism were simulated and analyzed,and the mechanism re-design was instructed by the simulating results.The mechanism has been used in the practical equipments,and the equipment has been put into used in actual manufacturing operation.

参考文献/References:

[1]TAM M S W,CHEUNG N C.一个用于制造自动化的高速高精度线性驱动系统[C]//应用动力电子会议与展览论文集.纽约:IEEE出版社,2001,1:440-444(英文版).
[2]Medding J,Stalder R,Niederhauser M,等.芯片键合技术[C]//国际电子制造技术会议论文集.纽约:IEEE出版社,2004:68-73(英文版).
[3]李克天,陈新,吴小红,等.粘片机引线框架的空间凸轮供送机构设计[J].中国机械工程,2005,16(1):54-56.
[4]Ajit S Gaunekar,Gray P Widdowson,Narasimalu Srikanth,等.使用柔性轴承高精度镜头聚焦机构的设计与开发[J].精密工程,2005,29(1):81-85(英文版).
[5]林清安.Pro/ENGINEER机构设计与仿真[M].北京:电子工业出版社,2007.
[6]李增刚.ADAMS入门详解与实例[M].北京:国防工业出版社,2006.

[1]TAM M S W,CHEUNG N C.A high speed high precision linear drive system for manufacturing automation[C]// Applied Power Electronics Conference and Exposition.NY:IEEE,2001,1:440-444.
[2]Medding J,Stalder R,Niederhauser M,et al.Thin die bonding techniques[C]//Electronics Manufacturing Technology Symposium.NY:IEEE,2004:68-73.
[3]LI Ke-tian,CHEN Xin,WU Xiao-hong,et al.3D cam conveyor structure design of die bonder leadframe[J].China Mechanical Engineering,2005,16(1):54-56(in Chinese).
[4]Ajit S Gaunekar,Gray P Widdowson,Narasimalu Srikanth,et al.Design and development of a high precision lens focusing mechanism using flexure bearings[J].Precision Engineering,2005,29(1):81-85.
[5]LIN Qing-an.Mechanism Design and Simulation in Pro/Engineer[M].Beijing:Publishing House of Electronics Industry,2007(in Chinese).
[6]LI Zeng-gang.ADAMS Introduction and Examples[M].Beijing:National Defense Industry Publisher,2006(in Chinese).

备注/Memo

备注/Memo:
收稿日期:2008-08-07;修回日期:2009-01-16
基金项目:国家自然科学基金资助项目(50805025);广东省科技计划资助项目(2008B010400011)
作者简介:袁清珂(1963-),男(汉族),山东省青岛市人,广东工业大学教授、博士.E-mail:qkyuan@gdut.edu.cn
更新日期/Last Update: 2009-05-15